How to install the hole-free hook?

The punch-free hook is a small prop commonly used by people that can help hang various objects, so how do you install the punch-free hook?

How to install the punch-free hook？

1. There are three hooks on the no-drilling hook, and when placing them on the wall, place their small tails upward; 2. Gently tap the bottom steel needle of the hook, and then tap the other two steel needles. 3. Note that the three small steel needles of the hook cannot be knocked in at the same time, so as not to damage the wall.

Three situations where the punch-free hook cannot be used

1. The punch-free hook cannot be used in the bathroom, nor can it be hooked to a hair dryer. This is because the bathroom is a relatively humid area. If no punching hooks are used on the wall, the glue will become weak after a short period of time, and it will fall sooner or later. In addition, if an electrical appliance such as a hair dryer is placed, due to the relatively large weight, the hook will also fall off, thus breaking the hair dryer.

2. For the shower shelf, try not to use the hole-free hook for installation. After most people install the shower head, they will choose to use the hook without punching it to fix it, so as to achieve the purpose of placing the shower head one by one. But in fact, the shower will flow out a lot of water, and the water will be poured on the non-punching hook for a long time, which will easily reduce the viscosity of the hook, and it will fall off after a long time.

3. When decorating the wall of the living room, many families will choose to use photo frames for decoration, but they are not willing to damage the wall, so they will choose to use a hook without punching to hook the photo frame on the wall, but this is not the correct way of doing it. You should know that in the summer, the weather will be very hot, which will easily cause the non-marking glue to soften, thereby reducing its viscosity, causing the photo frame to fall off, and leaving glue marks on the wall.