Main mold temperature controller maintenance

  • Published:
  • Views:235

Mold temperature controller equipment is also known as a mold thermo-regulator or mold thermostat machine. A mold temperature controller machine, in particular, is a mechanical device that includes both heating and cooling. Maintenance is required during long-term use of the mold temperature machine to ensure normal operation and extend its service life. The following aspects can be used to carry out the main maintenance work:

1. Cleaning: Clean the mold temperature controller on a regular basis, including the appearance and internal pipelines, to keep it clean and dry and to prevent dust and impurities from entering the interior of the equipment.

2. Lubrication work: Lubricate the equipment's lubricating parts to reduce wear and friction and keep the equipment in good working order.

3. Regular inspection: Regular inspection of equipment, including electrical, cooling, and heating systems, as well as the fastening of each part.

4. Replace worn parts: Replace worn parts such as filters, sealing rings, wires, and so on on a regular basis to ensure the equipment's normal operation and safety.

5. Preventive maintenance: In addition to routine maintenance, preventive maintenance is required to avoid equipment failure, such as replacing aging parts on time, strengthening equipment protection measures, and so on.

In short, the maintenance of the mold temperature machine needs to be carried out from many aspects to ensure the normal operation of the equipment and prolong the service life, reducing the possibility of failure.

Send Inquiry